You may also like
Tired of tripping over the bikes cluttering the floor and walls of your garage? The Multi-Bike XL Lifter is the easiest and safest way to hoist and store up to 6 bikes overhead in your garage, no other system even comes close for convenience, safety, or ease of use. Simply raise and lower your bikes with a single touch on the app with complete peace of mind due to the robust built-in safety mechanisms.
- Easy installation
- 200lb weight capacity
- Built-in safety features
- Can store up to 6 bikes
- Ships directly from our Utah warehouse🇺🇲
- 57" lifting frame and 12x 4' straps for bike storage
- One-touch lifting and lowering with our Bluetooth app
Buy one get one 10% off - automatically applied at checkout
Free Shipping
On all orders in the U.S. (limited time)
Limited Warranty
1-Year Limited Warranty on all purchases
Satisfaction Guarantee
30-Day Satisfaction Guarantee on all orders
Financing Available
Make life easier on your back and your wallet, finance your purchase with Shop Pay
How does it work?
This system contains two(2) in-house developed lifting motors aptly named the MyLifter's. Each MyLifter connects directly to one side of the frame and auto-synchronizes with the other MyLifter for perfectly level lifting/lowering with a single touch on the Bluetooth app. Simply press the down button, strap your bikes to the frame, then press the up button. This is the simplest and most efficient overhead bike storage system on the market.
Is it easy to use?
It couldn't be easier. The control device is your phone with our Bluetooth app using a simple slider (middle) or one-touch buttons (top-right/bottom-right). Using an app allows complete control over who can/can't access your lift to prevent any accidents. With a switch controlled system or a pulley system, there's nothing stopping someone from accidentally lowering your bikes on top of something and damaging it. With our system, you have 100% control over who can raise/lower your bikes.
What makes it special?
Our motors (MyLifters) were developed in house by our team of Engineers specifically for homes and garages. Most of our "competitors" use cheap repurposed automotive winches with zero built-in safety features. Each of our MyLifter motors features weight sensing technology to warn you of potential problems and prevent overloading of the system, each MyLifter motor has adjustable speed control so you can be as precise as needed, and each MyLifter motor can set custom high and low "Smart Points" so your bikes raises and lowers to the same height every time with just one touch.
What if the cable gets tangled?
The short answer is, it won't. Our Engineers thought of everything; each MyLifter contains a grooved path for the cable and an integrated guide that slides along the device as it turns to perfectly wind and unwind the cable every time. We are the only manufacturer that has spent the time and resources necessary to develop a tangle-free winding mechanism to ensure your system stays reliable for years.
What's the weight limit?
Each MyLifter motor has a safe lifting capacity of 100lbs. With a total of two(2) MyLifters, this system can easily lift 200lbs. Keep in mind that the lifting frame itself weighs 10lbs, meaning that 190lbs worth of bikes can be hoisted.
How safe is it?
We feel 100% confident that this is the safest system on the market. We achieved a UL safety certification with a multiple factor safety rating for all components, Bluetooth control means that no one can accidentally raise/lower your bikes, two independent lifting motors means that the load is spread evenly over the greatest area possible to put the lowest stress on the supporting structure, and our weight-sensing mechanism will not only notify you of potential problems but will also prevent overloading of the system even if it was overloaded by accident.
Will my trusses support the weight?
The question we get asked the most. Before we ever released this system to the public, we stress tested it on a wide variety of different truss/rafter types, spans, and sizes. In every single stress test we completed, even on 24" span 2x4's, failures only occurred at multiple factors of weight capacity and we never once experienced a structural failure. Today, these systems have been installed in tens of thousands of homes across the U.S. for the better part of 10 years and we've achieved a perfect zero accident record in all of that time. We put in the work necessary to ensure the safety of your home and your belongings.
Will it fit in my garage?
To ensure that your bikes will fit in the space desired, measure the height of your bikes (B). Take the height of your tallest bike and add 9.5in (A) to find the exact overhead clearance.
The bottom of the frame hangs down 11ft 9in from the ceiling (C) when fully lowered, add the height of your bike to see if it will reach the ground.
A:9.5in B: Height of bikes C:11ft 9in
Is it easy to install?
Installing the Multi-Bike XL Lifter in your garage is easy, with the difficulty level being similar to installing a TV on the wall. There are two main things you will need to do. First, you will need to install the MyLifter system on your ceiling and then lower the lifting cables. Second, you will need to assemble to lifting frame and attach the frame to the lifting cables. Installation instructions are included with each purchase. If you need installation done for you, inquire here
What does it come with?
- 2x MyLifter
- 2x 30" Smart Track
- 2x Power Adapter
- 6x Quad hooks
- 12x Straps
- Multi-Bike XL frame
- All necessary hardware
Are there any current promotions?
Absolutely, for a limited time you can take advantage of our Spring 2024 promotions: Buy-one-get-one 10% off and enjoy Free Shipping throug April 30th, 2024